Datasheet4U Logo Datasheet4U.com

AN8813NSB - 4-channel driver

Datasheet Summary

Description

Pin No.

1 Description Base control pin for an external transistor of 3.3 V regulator 2 3 4 5 6 7 8 9 10 11 12 13 14 3.3 V regulator output monitor pin N.C.

Features

  • For the loading motor channel, there are 4 modes, that is, forward rotation, reverse rotation, brake and standby modes, and you can select a mode among them. The gain of it is fixed to 6 dB (±0.5 dB) with a small dispersion among the products.
  • 3.3 V supply voltage is available due to an external PNP-tr.
  • Driver I/O gain setting is possible with an additional external resistor.
  • Since the output and input lines are separated and respectively collected together.

📥 Download Datasheet

Datasheet preview – AN8813NSB

Datasheet Details

Part number AN8813NSB
Manufacturer Panasonic Semiconductor
File Size 53.23 KB
Description 4-channel driver
Datasheet download datasheet AN8813NSB Datasheet
Additional preview pages of the AN8813NSB datasheet.

📁 Similar Datasheet

  • AN883 - LOW-COST I2C LEVEL TRANSLATOR (Silicon Laboratories)
  • AN884 - Driving Capacitive Loads (Microchip)
  • AN8850 - MOTOR CONTROL CIRCUITS (Unisonic Technologies)
  • AN8 - MAGNETIC SENSOR (Cherry)
  • AN80196CA - ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 (Intel Corporation)
  • AN80196CB - ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 (Intel Corporation)
  • AN804 - P-Channel MOSFET (Vishay Siliconix)
  • AN805 - PWM Optimized Power MOSFET (Vishay Siliconix)
  • AN8053N - 1.0W Power Amplifier (Matsushita)
  • AN809 - Digitally Addressable DALI Dimming Ballast (Microchip)
Other Datasheets by Panasonic Semiconductor

Full PDF Text Transcription

Click to expand full text
ICs for Compact Disc/CD-ROM Player AN8813NSB 4-channel driver IC for optical disk drive s Overview The AN8813NSB is a 4-channel driver IC of the BTL method. Ch.1 is used only for the loading motor with little gain dispersion. 18.4±0.2 (5.15) (4.8) 28 22 21 15 (1.315) Unit: mm s Features • For the loading motor channel, there are 4 modes, that is, forward rotation, reverse rotation, brake and standby modes, and you can select a mode among them. The gain of it is fixed to 6 dB (±0.5 dB) with a small dispersion among the products. • 3.3 V supply voltage is available due to an external PNP-tr. • Driver I/O gain setting is possible with an additional external resistor • Since the output and input lines are separated and respectively collected together, pattern designing is relatively easy.
Published: |